A ProfiNET management system operator is unable to add a ProfiNET Conformance Class B device to a SIMATIC management station. The device is connected to interface FastEthernet1/3. Based on the provided CLI output, which statement is correct?switch#show profinet lldpFa1/1 port-003-00000 On -Fa1/2 port-004-00000 On -Fa1/3 port-005-00000 Off -Fa1/4 port-006-00000 Off -Fa1/5 port-007-00000 On -Fa1/6 port-008-00000 Off -Fa1/7 port-009-00000 On -Fa1/8 port-010-00000 Off -
Your controller has a high performance EtherNet/IP interface with port speed of >30,000 packets per second and 80% spare capacity. A new PowerFlex 753 drive will be added to the system with an RPI of 2ms and has been connected to a switch; you have been asked to set up the switch port. You open the EDS file and see that the drive will support 16 CIP connections and has transmit and receive capacity of 1,000 control packets per second. What do you set as the storm control pps threshold limit for the port?
Refer to the exhibit. Which lines represent a CIP connection being established between two devices?
You have reached the limit of IPv4 IGMP groups available on a Cisco IE 3000 switch that was deployed using the Express Setup. Which CLI command will increase the number of available IPv4 IGMP groups and multicast routes from 256 to 1000 on this switch?
After commissioning several Stratix 5700 switches in a ring topology, you want to verify the installation against the network logical design. Specifically, you want to verify where the IGMP querier resides. What command can be issued in CLI to display the IP of the querier per VLAN?
How are I/O timeout and Safety I/O timeout calculated?
