Create Next App

Exam contains 64 questions

Page 9 of 11

Question 49 🔥

How many rack units does a Cisco TelePresence MCU 5300 occupy in a standard data center rack?

Which database solution meets these requirements?

A. 1

Highly voted

B. 2

Highly voted

C. 3

Highly voted

D. 4

Highly voted

Discussion of the question

Question 50 🔥

Using the web interface, where can you verify the licensing on a Cisco TelePresence MCU 5300?

Which database solution meets these requirements?

A. Settings > Upgrade

Highly voted

B. Settings > Conferences

Highly voted

C. Settings > Content

Highly voted

D. Status > Help

Highly voted

Discussion of the question

Question 51 🔥

How many endpoints can register to the built-in H.323 gatekeeper of a Cisco TelePresence MCU 5300 Series device?

Which database solution meets these requirements?

A. none; there is no built-in gatekeeper

Highly voted

B. 25

Highly voted

C. 100

Highly voted

D. 300

Highly voted

Discussion of the question

Question 52 🔥

How should you configure the IP address and default gateway on a Cisco TelePresence MCU 5300 Series device during setup?

Which database solution meets these requirements?

A. Connect an Ethernet cable to the second Ethernet port of the MCU, and point your web browser to 192.168.2.2.

Highly voted

B. Console into the serial port in the front panel, and use the static command

Highly voted

C. Use the arrows next to the LCD in the front to change the IP address, subnet mask, and default gateway.

Highly voted

D. Change it from the Cisco VCS.

Highly voted

Discussion of the question

Question 53 🔥

How do you upgrade the software of an existing installation with a Cisco TelePresence MCU 5300?

Which database solution meets these requirements?

A. Download the new software, navigate to Maintenance > Upgrade Software, and upload the software

Highly voted

B. Use FTP to access the MCU, browse to the /etc/software/upgrade directory, put the new load in, and reboot the MCU

Highly voted

C. Navigate to Settings > Upgrade, then follow instructions under Main Software Image.

Highly voted

D. Use an SFTP client to log in to the MCU, and place the software in the /etc/software/upgrade directory

Highly voted

Discussion of the question

Question 54 🔥

How do you obtain a SIP log from the Cisco TelePresence MCU 5300 to send to Cisco TAC for further analysis?

Which database solution meets these requirements?

A. Navigate to Maintenance > Logs, and then download the log

Highly voted

B. Navigate to Logs > Event Log > SIP Details, and then download the log

Highly voted

C. Navigate to Logs > H.323/SIP Log, click Enable H323/SIP Logging, and then download the log.

Highly voted

D. Use FTP to access the MCU, go to the directory /etc/logs/sip, and get all the files in that directory

Highly voted

Discussion of the question

Ready to Pass Your Certification Test

cisco 500_007

Exam contains 64 questions

Lorem ipsum dolor sit amet consectetur. Eget sed turpis aenean sit aenean. Integer at nam ullamcorper a.

Company

Product

Resources

Follow us