Everything You Need to Pass: juniper JN0_661

Click the exhibit button.[edit protocols pim]user@R1# showrp {bootstrap {family inet {priority 250;}}local {address 10.220.1.1;priority 1;group-ranges {224.1.1.11/32;224.0.0.0/4;}}}interface all;interface fxp0.0 {disable;}[edit protocols pim]user@R4# showrp {bootstrap {family inet {priority 249;}}local {address 10.220.1.4;priority 5;group-ranges {224.1.1.12/32;224.0.0.0/4;}}}interface all;interface fxp0.0 {disable;}Referring to the exhibit, which router will be the RP?

Click the Exhibit button.[edit] [edit]lab@r1# show protocols lab@r2# show protocolsospf3 { ospf3 {area 0.0.0.0 { area 0.0.0.0 {interface 1o0.0; interface 1o0.0;interface ge-1/0/6.0; interface ge-1/0/7.0;}}lo0 = 172.16.100.1/32 [edit]fc00:1000::1/128 lab@r2# show protocolsospf3 {area 0.0.0.0 {interface 1o0.0;interface ge-1/1/7.0;interface ge-1/1/6.0;}}You must ensure that r1's IPv4 loopback address exists in r3's inet 0 routing table.Referring to the exhibit, which statement is true?

Click the Exhibit button.Referring to the exhibit, you have a network that uses PIM-SM and you need to block certain PIM register messages.Which two statements are correct in this situation? (Choose two.)

Which statements are true about NG MVPNs? (Choose two.)

A service provider wants to start using all of their LSPs for internal traffic and not just their MPLS VPNs. Any solution must ensure that existing VPNs and routing policies will continue to function properly.Which MPLS traffic engineering parameter would accomplish this task?

Click the Exhibit button.[edit]user@PE-1# run show l2 circuit connectionsLayer-2 Circuit Connections:Legend for connection status (St)EI - - encapsulation invalid NP - - interface h/w not presentMM - - mtu mismatch Dn - - downEM - - encapsulation mismatch VC-Dn - -Virtual circuit Down -CM - - control-word mismatch Up - -operationalVM - - vlan id mismatch CF - - Calladmission control failureOL - - no outgoing label IB - - TDMincompatible bitrareNC - - intf encaps not CCC/TCC TM - - TDMmisconfigurationBK - - Backup Connection ST - - StandbyConnection -CB - - rcvd cell-bundle size bad SP - - StaticPseudowire -LD - - local site signaled down RS - - remotesite standbyRD - - remote site signaled down XX - - unknownLegend for interface status -Up - - operational -Dn - - down -Neighbor: 4.4.4.4 -Interface Type St Timelast up #Up transge-0/0/1.512 (vc 1) rmt OL[edit]user@PE-1# show protocols ldpinterface ge-0/0/2.0;[edit]user@PE-1# show protocols l2circuitneighbor 4.4.4.4 {interface ge-0/0/1.512 {virtual-circuit-id 1}}[edit]user@PE-1# show interfaces ge-0/0/1vlan-tagging;encapsulation vlan-ccc;unit 512 {encapsulation vlan-ccc;vlan-id 512;}[edit]uxer@P-1 # show protocols ldpinterface all;[edit]user@P-2# show protocols ldpinterface all;[edit]user@PE-2# run show l2circuit connectionsLayer-2 Circuit Connections:Legend For connection status (St)EI - - encapsulation invalid NP - - interface h/w not presentMM - - mtu mismatch Dn - - downEM - - encapsulation mismatch VC-Dn - -Virtual circuit Down -CM - - control-word mismatch Up - -operationalVM - - vlan id mismatch CF - - Calladmission control failureOL - - no outgoing label IB - - TDMincompatible bitrateNC - - intf encaps not CCC/TCC TM - - TDMmisconfigurationBK - - Backup Connection ST - - StandbyConnection -CB - - rcvd cell-bundle size bad SP - - StaticPsewdowire -LD - - Local site signaled down RS - - remotesite standbyRD - - remote site signaled down XX - - unknownLegend for interface status -UP - - operational -DN - - down -Neighbor: 1.1.1.1 -Interface Type St Timelast up #Up transge-0/0/1.512 (vc 1) rmt OL[edit]user@PE-2# show protocols ldpinterface ge-0/0/2.0;[edit]user@PE-2# show protocols l2circuitneighbor 1.1.1.1 {interface ge-0/0/1.512 {virtual-circuit-id 1;}}[edit]user@PE-2# show interfaces ge-0/0/1vlan-tagging;encapsulation vlan-ccc;unit 512 {encapsulation vlan-ccc;vlan-id 512;}Referring to the exhibit, you have configured an L2 circuit that connects Site-1 and Site-2, but the L2 circuit is not functioning. The topology in this scenario is shown below.Site-1 > PE-1 > P-1 > P-2 > PE-2 Site-2Which action will allow communication between Site-1 and Site-2?