What are two characteristics of L3VPNs? (Choose two.)
Which routing instance type is used with a Layer 3 VPN?
You are asked to configure PIM-SM in your network. Your implementation must allow for load sharing between redundant RPs and, should an RP failure occur, the RP failover time should be minimized.Which two configuration tasks are required in this scenario? (Choose two.)
Click the Exhibit button.As a network administrator, you are asked to configure the VPN-B routing instance so that P routers are masked in CE2-to-CE5 trace routes. For the VPN-A routing instance, P routers should appear in CE1-to-CE4 trace routes.Referring to the exhibit, which two actions achieve this task? (Choose two.)
Click the exhibit button.user@PE2# run show 12circuit connectionsLayer-2 Circuit Connections:Legend for connection status (St)EI - - encapsulation invalid NP - - interfaceh/w not presentMM - - mtu mismatch Dn - - downEM - - encapsulation mismatch Vc-Dn - -Virtual circuit Down -CM - - control-word mismatch UP - -operationalVM - - vlan id mismatch CF - - Call admissioncontrol failureOL - - no outgoing label IB - - TDMincompatible bitrateNC - - intf encaps not CCC/TCC TM - - TDMmisconfigurationBK - - Backup Connection ST - - StandbyConnection -CB - - rcvd cell-bundle size bad SP - - StaticPseudowire -LD - - local site signaled down RS - - remotesity standbyRD - - remote site signaled down HS - - Hot-standby ConnectionXX - - unknown -Legend for interface status -UP - - operational -Dn - - down -Neighbor: 10.10.1.1 -Interface Type St Timelast up #Up transge-1/1/1.6 (vc 2) rmt VM[edit protocols 12circuit]user@PE2# showneighbor 10.10.1.1. {interface ge-1/1/1.6 {virtual-circuit-id 2;encapsulation-type ethernet-vlan;}}[edit logical-systems jpe interfaces]user@PE2# showge-1/1/1 {unit 6 {encapsulation vlan-ccc;vlan-id 6;family ccc;}}user@PE1# run show 12circuit connectionslogical-system kpeLayer-2 Circuit Connections:Legend for connection status (St)EI - - encapsulation invalid NP - - interfaceh/w not presentMM - - mtu mismatch Dn - - downEM- - encapsulation mismatch VC-Dn - -Virtual -circuit Down -CM - - control-word mismatch Up - -operationalVM - - vlan id mismatch CF - - Call admissioncontrol failureOL - - no outgoing label IB - - TDMincompatible bitrateNC - - intf encaps not CCC/TCC TM - - TDMmisconfigurationBK - - Backup connection ST - - StandbyConnection -CB - - rcvd cell-bundle size bad SP - - StaticPseudowire -LD - - local site signaled down RS - - remotesite standbyRD - - remote site signaled down HS - - Hot-standby ConnectionXX - - unknown -Legend for interface status -Up - - operational -Dn - - down -Neighbor: 10.10.1.3 -Interface Type St Timelast up # Up transge-1/0/1.5 (vc 2) rmt VM[edit protocols 12circuit]user@PE1# showneighbor 10.11.1.1 {interface ge-1/0/1.5 {virtual-circuit-id 2;encapsulation-type ethernet-vlan;}}[edit interfaces]user@PE1#ge-1/0/1 (unit 5 {encapsulation vlan-ccc;vlan-id 5;family ccc;}}An LDP Layer 2 circuit between PE1 and PE2 is not passing traffic. Both PE1 and PE2 show the circuit state as VM - - vlan id mismatch.Referring to the exhibit, which action will solve this problem?
A customer's traffic is traversing your network, which consists of Junos devices. You must configure class of service for the traffic to meet a service-level agreement.In this scenario, which two statements are true? (Choose two.)
