-- Exhibit --{hold:node0}user@host1> show chassis cluster statusCluster ID. 1 -Node Priority Status Preempt Manual failoverRedundancy group: 0 , Failover count: 0node0 1 hold no no node1 0 lost n/a n/a{hold:node0}user@host1> show configuration | no-moresystem {host-name host1;root-authentication {encrypted-password "$1$KI99zGk6$MbYFuBbpLffu9tn2.sI7l1"; ## SECRET-DATA}name-server {172.16.10.100;}services {ssh;telnet;web-management {http;}}syslog {user * {any emergency;}file messages {any any;authorization info;}file interactive-commands {interactive-commands any;}}}interfaces {ge-0/0/0 {unit 0 {family inet {address 10.210.14.131/26;}}}ge-0/0/8 {unit 0 {family inet {address 172.16.1.1/24;}}}ge-0/0/9 {unit 0 {family inet {address 172.16.10.1/24;}}}}security {policies {default-policy {permit-all;}}zones {functional-zone management {interfaces {ge-0/0/0.0;}host-inbound-traffic {system-services {ssh;telnet;ping;traceroute;http;snmp;}}}security-zone Trust {host-inbound-traffic {system-services {any-service;}}interfaces {ge-0/0/9.0;}}security-zone Untrust {host-inbound-traffic {system-services {any-service;}}interfaces {ge-0/0/8.0;}}}}----------------{hold:node1}user@host2> show chassis cluster statusCluster ID. 1 -Node Priority Status Preempt Manual failoverRedundancy group: 0 , Failover count: 0node0 0 lost n/a n/a node1 1 hold no no{hold:node1}user@host2> show configuration | no-moresystem {host-name host2;root-authentication {encrypted-password "$1$KI99zGk6$MbYFuBbpLffu9tn2.sI7l1"; ## SECRET-DATA}name-server {172.16.10.100;}services {ssh;telnet;web-management {http;}}syslog {user * {any emergency;}file messages {any any;authorization info;}file interactive-commands {interactive-commands any;}}}interfaces {ge-0/0/0 {unit 0 {family inet {address 10.210.14.132/26;}}}ge-0/0/8 {unit 0 {family inet {address 172.16.1.1/24;}}}ge-0/0/9 {unit 0 {family inet {address 172.16.10.1/24;}}}}security {policies {default-policy {permit-all;}}zones {functional-zone management {interfaces {ge-0/0/0.0;}host-inbound-traffic {system-services {ssh;telnet;ping;traceroute;http;snmp;}}}security-zone Trust {host-inbound-traffic {system-services {any-service;}}interfaces {ge-0/0/9.0;}}security-zone Untrust {host-inbound-traffic {system-services {any-service;}}interfaces {ge-0/0/8.0;}}}}-- Exhibit --Click the Exhibit button.A user attempted to form a chassis cluster on an SRX240; however, the cluster did not form. While investigating the problem, you see the output shown in the exhibit.What is causing the problem?
-- Exhibit ""-- Exhibit --Click the Exhibit button.There is an existing chassis cluster connected to the corporate network 192.168.1.0/24. You are asked to connect another department to this VLAN. To achieve this, you add a new chassis cluster to the network. After connecting to the network, the cluster experiences traffic problems. You have verified that the addresses and VLAN IDs are configured correctly.Referring to the exhibit, which configuration would resolve this problem?
-- Exhibit --{primary:node0}user@host> show configuration chassis | display inheritancecluster {redundancy-group 1 {node 0 priority 200;node 1 priority 100;interface-monitor {ge-0/0/12 weight 255;ge-5/0/12 weight 255;}}}-- Exhibit --Click the Exhibit button.A customer reports that their SRX failover is not working as expected. They expected node1 to become the primary node for the control plane when interface ge-0/0/12 failed. However, when ge-0/0/12 failed, node0 remained the primary node. They send you the output shown in the exhibit.What is causing this problem?
Click the Exhibit Button.The node1 device of your chassis cluster experiences a power failure. It boots using the backup partition, while node0 remains on the primary partition.However, the status for node1 is lost. You determine that the status of the physical links are operational, so you proceed to view the outputs shown in the exhibit.In this scenario, what is causing the problem?
Click the Exhibit button.You are reviewing the status of a high-end SRX Series chassis cluster and notice that some interfaces have error messages.Referring to the exhibit, which two steps would you use to troubleshoot the problem? (Choose two.)
Network users mention that they are having an issue downloading files. You determine that the issue began after you configured the full file-based antivirus feature on your SRX Series device. After reviewing the UTM antivirus statistics, you do not find any signs of blocked traffic because of threats.Which configuration change solves this problem?
