SIMULATION -RHCE Test Configuration InstructionsInformation for the two systems you will use in test is the following: system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client.Password for both of the two systems is atenorthSystem's IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: system1.group3.example.com: 172.24.3.5 system2.group3.example.com: 172.24.3.10The subnet mask is 255.255.255.0Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3. host.group3.example.com provides a centralized authentication service domainGROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account:Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: http://server1.group3.example.com/rhelPart of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don't need them.Configure the iSCSI Server -Configure the system1 to provide a ISCSI service disk named iqn.2014-09.com.example.domain11:system1 and meet the following requirements at the same time:1. The Server Port is 32602. Use iSCSI-store as its back-end volume, its size is 3G3. This service just can be accessed by system2.domian11.example.com
SIMULATION -RHCE Test Configuration InstructionsInformation for the two systems you will use in test is the following: system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client.Password for both of the two systems is atenorthSystem's IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: system1.group3.example.com: 172.24.3.5 system2.group3.example.com: 172.24.3.10The subnet mask is 255.255.255.0Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3. host.group3.example.com provides a centralized authentication service domainGROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account:Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: http://server1.group3.example.com/rhelPart of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don't need them.Configure iSCSI Clients -Configure the system2 to make it can link to iqn.2014-09.com.example.domain11:system1 provided by the system, meet the following requirements at the same time:1. iSCSI device automatically loads during the system start-up.Block device iSCSI contains a 2100MIB partition, and is formatted as ext4.This partition mount to the /mnt/data and mount automatically during the system start-up.
SIMULATION -RHCE Test Configuration InstructionsInformation for the two systems you will use in test is the following: system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client.Password for both of the two systems is atenorthSystem's IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: system1.group3.example.com: 172.24.3.5 system2.group3.example.com: 172.24.3.10The subnet mask is 255.255.255.0Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3. host.group3.example.com provides a centralized authentication service domainGROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account:Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: http://server1.group3.example.com/rhelPart of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don't need them.Configure a Database -Create a Maria DB database named Contacts on system1 and meet the following requirements at the same time:1. The database should contain the contents of the database replication, URL for copying files is: http://rhgls.domain11.example.com/materials/users.mdb2. Database just can be accessed by localhost3. In addition to the root user, this database only can be searched by user Luigi, user's password is redhat4. The password for root user is redhat, does not allow empty password
According to the following requirements, deploying your ftp login rule:1. Users in example.com domain must be able to login to your ftp server as an anonymous user.2. But users outside the example.com domain are unable to login to your server
SIMULATION -RHCE Test Configuration InstructionsInformation for the two systems you will use in test is the following: system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client.Password for both of the two systems is atenorthSystem's IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: system1.group3.example.com: 172.24.3.5 system2.group3.example.com: 172.24.3.10The subnet mask is 255.255.255.0Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3. host.group3.example.com provides a centralized authentication service domainGROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account:Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: http://server1.group3.example.com/rhelPart of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don't need them.Database Query -Use database Contacts on the system1, and use the corresponding SQL to search and answer the following questions:1. What's the person name whose password is solicitous?2. How many people's names are John and live is Shanghai at the same time?
Cofigure SELINUX -Modify the state of selinux to Enforcing modeUse VIM /etc/selinux -
